Nickeldraht 0,025

Verkauft wird aus einem Restbestand Nickeldraht 0,025 mm KTNP2 GOST 2179-75 nickel wire is manufactured with a chemical purity of not less than 99.8%. Nickel wire DKRNT 0.025 KT NP2 is used in microelectronics, electronics and micro-welding. Qualitative nickel wire has a clean surface, without delaminations, pores and cracks. The nickel wire has a resistance from 880 to 1320 MPa or 90 to 135 kgf / mm2. Each coil is placed in a plastic container One gram corresponds to a length of 227 meters. The goods are transferred to the Buyer with the following accompanying documents: 1. The certificate of quality of the manufacturer for the batch of the Goods; 2. Appendix No. 1 to the certificate of quality; 3. Appendix No. 2 to the quality certificate; 4. Certificate of origin; 5. Certificate of radiation safety; 6. Certificate of chemical composition with the Test Report from the IARC "Giredmet"; Applications of pure nickel wire • Vacuum equipment, pump grids, internal components of vacuum valves; • Components inside the electronic tubes; • As resistors, when significant changes in resistance at high temperatures are required; • Components of hydrogen thyratrons; • Thermometers of electrical resistance; • Thermal thermometers (they are used for measuring temperature in the production of textiles, chemical, food industries, brewing, with automatic measurement of temperature in instrumentation and laboratory instruments, furnaces, extruders for the production of plastics, temperature in bearings); • Wire terminals of lamps and grids; • Fiber-optic and electronic connectors; •​Guitar strings; • Superconductors; • Transmission of electricity; • Components of linear supports; • Motor collector plates; • Heads of transistors; • Anodes for electronic tubes; • Semiconductor manufacturing; • Production of batteries; • Thermal and electron-beam evaporators; • Low-temperature organic evaporator; • Vacuum precipitation; • Condensation from the vapor phase; • Atomic evaporation; • Production of sodium hydroxide, especially at a temperature above 300 degrees; • Production of soap and viscose rayon; • Production of aniline hydrochloride, benzene, methanol, ethanol; • Production of vinyl chloride monomer; • Ceramic anode components for oxygen generation and solid fuel production; • Surgical wire; • Net of pure nickel is used for reforming methane steam.